PSV Proportionating Electromagnetic Valves are designed to respond to variable power inputs to regulate the flow of liquids and gases proportionately. 

For added safety PSV valves are normally closed (NC) when deenergized. They can also serve as “ON-OFF” valves. For control functions see the PSV-D Driver Module.

Flow is controlled by increasing or decreasing the voltage applied to the coil. This causes a magnetic force which raises the core and allows gas to flow.

PSV valves, constructed of stainless steel are available in five different sizes covering flow ranges from 3.5 sL/min - 100 sL/min air and 125 mL/min - 2.85 L/min H2O.

Principle of Operation:
A variable stroke electromagnetic valve featuring a valve seat design which permits increasing or decreasing flow rates of liquids or gases through it in proportion to variable input power.

Regulator Systems:
Complete flow regulating systems include a PSV electromagnetic valve connected to a pulse width modulated PSV-D Driver Module. For details see Driver Module description. Optional external RS-232 or RS-485 modules are available.

POWER INPUT:
0-30Vdc

MAXIMUM POWER REQUIRED:
400 mA

TYPE OF OPERATION:
Normally closed (NC) when de-energized

CONNECTIONS:
1/4” Compression fittings optional 1/8” and 3/8”

DIMENSIONS:
3.45” (87.6mm) high x 3.25” (82.6mm) long (including compression fittings) x 1.00” (25.4mm) deep.

**MATERIALS IN FLUID CONTACT:
Types 316 and 416 stainless steel, Viton7 O-rings. Optional O-rings: Buna, EPR and Kalrez7

MAXIMUM PRESSURE:
1000 psig (3448 kPa)

MAXIMUM DIFFERENTIAL PRESSURE:
50 psid (345 kPa)

LEAK INTEGRITY:
1 X 10-9 smL/sec Helium individually tested

MAXIMUM TEMPERATURE:
(typical): 174FF (79FC) inside, 130FF (54FC) outside surface at 24Vdc.