|  | PowerStation-Ultima | |
| PS-ULTIMA automated test system for qualifying up to 5 cells simultaneously. System consist of a PC controlled, electronic load bank and fuel cell system controller, operating on ElectroChem's proprietary Windows™-based software system. The user can program the individual flow rates, temperatures, and humidification of the reactant gases to each fuel cell. The fuel cell electrochemical performance along with the operating conditions is logged by Power Station™ and shown on the control screen. Test data is save to a file that can be exported to a spreadsheet program for data sorting and printing of test results
Multiply the Power Station’s Capacity!
8 Additional Gas Lines for 4 More Fuel Cells!
Highest Quality Humidification Capacity!
Automatic or Manual Operation!
ElectroChem’s Ultima gas management unit multiplies the power of the Power Station to enable fuel cell and electrochemical testing to an efficient level. Designed for PEM, alkaline, and phosphoric acid fuel cells, it provides added capacity for 4 more single cells and fuel cell stacks. For those faced with extensive fuel cell testing requirements, there is no more advanced system, and no safer system for unattended operation. Only sold with the PS-Ultima System Controller.
Key Features
- Gas Management Multiplier of the CompuCell Module
- Precision automated gas supply, humidification and effluent management.
- Convenient front panel access to manual controls, and output and return gas fittings.
- Safety designed in through hardware features and software control.
|
| | | |  |
|
| | Specification Information | |
| Pressure |
Maximum Operating Pressure 50 psig (4.5 Bar) |
| Humidifiers (each) |
100% saturation at 75°C for Input Gas Flow of 2000 ml/min.
2 liter water bottles (max. fill capacity 1.6 liters) |
| Mass Flow Controllers |
Full Scale Ranges Available 10 to 20000 sccm
Control Range 2% to 100% of Full Scale
Accuracy +/-1% of Full Scale
Repeatability +/-0,2% of Full Scale
Resolution 0,1% of Full Scale
Wetted Materials 316L SS, Viton™, Nickel |
| Physical Characteristics |
20¾” W x 28½” H x 23” D
(53 cm x 72 cm x 58 cm)
180 lbs. (82 kg) |
| Gas Connections (Ultima Gas Management Unit Only) |
1/4” Swagelok™ Tubing Connectors
Front Panel
Output Humidified Reactant Gases to Fuel Cell (8)
Reactant Return Gases from Fuel Cell (8)
Ports for Refill of Humidifier Bottles (8)
Rear Panel
Input Reactant Gases
(Accomplished through CompuCell™)* (2)
Input Purge Gas
(Accomplished through CompuCell™)* (0)
Output Venting of Reactant Gases (2)
|
| Electronic Load |
Power: 800 Watts (also available 2000W or 4000W)
Selectable Voltage: 0-10, 0-20, and 0-50 Volts
Selectable Current: 0-2, 0-20, and 0-150 Amps
Constant Current and Voltage Mode:
Accuracy:
0,25% FS for med/high ranges
0,50% FS for low range
Resolution: 1/4000 of full scale
Constant Power Mode:
Accuracy: 3% FS for all ranges
Resolution: 0,25% of full scale
|
| Electric Requirements |
All power and control connections provided by Power Station™Control Unit* |
*The Ultima™Gas Management Unit is designed to operate in conjunction with the CompuCell™Gas Management Unit. Detailed Specifications on the CompuCell™are provided in separate literature available from ElectroChem. Please consult these documents for more complete information about the CompuCell™.
For more specifications refer to the Adobe PDF Product Manual. |
| | | | |
|
| | H-Tech Warranty & Guarantee | |
H-Tech will work directly with you to address any manufacturer defects or other warranty issues in order to resolve any problem quickly and efficiently with minimum consumer effort.
H-Tech's Warranty Policy |
| | | | |
|
| | H-Tech Shipping Information | |
• Estimated Ship Dimensions: " x " x "
• Estimated Ship Weight: lbs
• Lead time: 30 days
• Shipping origin: Woburn, United States
Please contact us for pricing on this product.
H-Tech's Shipping Policy |
| | | | |
|
|  |
