Tailor made for educational settings, this new teaching tool has the flexibility to evaluate fuel cell performance

Analog Mass Flow Meter (20 std. mL/min - 10 std. L/min)

(20 std. mL/min - 10 std. L/min) H2 Gas, Power Input 12VDC, Imput/Output Signal 0-5VDC / 0-5VDC, 1/4

Complete flow regulating systems include a PSV electromagnetic valve connected to a pulse width modulated PSV-D Driver Module

DFC programmable thermal mass flow controller with digital signal processing

The 150mm High /Low Alarm Flow Meter with

GFM mass flow meters are available with flow ranges from 10 mL/min to 1000 sL/min N2. Gases are connected by means of 1/4” 3/8” 1/2” compression fittings.

These compact and reliable PTFE needle valves; designed for laboratory and industrial applications for regulating corrosivie gases and liquids or for high purity service. The may also be used as shut off valves.

The resolution of the stepping motor driven needles is 0.0005

PTFE flow meter kit allows for easy changing of flow tubes in the field

L-Meter PTFE/AL No Valve 1/4

HSA plus two extra temperature controllers

PS-Reformate consists of a PC controlled, electronic load bank and a gas distribution unit for simulating reformate gas. Includes 6 independent gas channels; 4 fuel and 2 for oxidants, with independent control of each line.

A HSA-TC with two heated Gas Transfer Lines

ElectroChem’s CompuCell gas management unit enables fuel cell and electrochemical testing for PEM, alkaline, and phosphoric acid fuel cells, providing capacity for single cells and fuel cell stacks.

PS-Dual Range consists of a PC controlled, electronic load bank and a dual flow rate gas distribution unit that has 4 independent gas channels; 2 fuel and 2 for oxidants, with independent control of each line.

PS-ULTIMA automated test system for qualifying up to 5 cells simultaneously. System consist of a PC controlled, electronic load bank and fuel cell system controller, operating on ElectroChem's proprietary Windows™-based software system.

Adds Direct Methanol capabilites to the Power Station test system. Includes methanol pump with flow rates from 2.6 up to 100mL/min (higher rates available on request), 1 liter stainless steel methanol reservoir, computer/local control capability.